A solution to the slow speed of small rice mills:
The speed of a small rice mill is relatively slow. The main reason is: 1. The working voltage is relatively low. In this case, if the motor cannot withstand it, the motor speed ratio will decrease. People need to look at switching power supplies. Is the distance between the electricity meter and the human motor too far, or is the distance between the human electricity meter and the motor relatively narrow? Generally speaking, small rice mills belong to high-power rice mills. The power plug is required to exceed 4 square meters of the cable. This is a key reference. It is a special type that should be transported through dedicated lines. Compared to household appliances such as light bulbs with lower output power, it is incomparable. It should have a shorter distance and thicker cable.
2. The slow speed is because the rice is not clean. The import volume of small rice mills is very small. There is too much rice inside the person, making it difficult to get through. The principle of a small rice mill is that the raw materials are formed by spiral extrusion through feeding. If there is gas in the middle, the actual effect is undoubtedly not as good. Needless to say, the speed is very slow, so we need to check if people's rice is clean. Neat, if not good enough, please clean it with a Dutch windmill air separator before starting the rice milling.
3. Do not disassemble or replace spare parts to damage the small rice mill
The key part of a small rice mill is the rice sieve. Long term squeezing of the rice sieve can damage it. If not replaced, rice is easily crushed and dirty. If it enters the husk, the rice sieve must be damaged. Pay attention to inspection and replacement anytime and anywhere. Another component is the rolling bearing, which will be damaged after a certain period of high-speed rotation. If a loud sound is detected, the device needs to be stopped immediately. After the management organization is closed, check if the rolling bearings are damaged and open the equipment. Inspect the human body and replace the rolling bearings if they are damaged. If it is not damaged and saltless butter is added, it can be applied to people's equipment. Regular maintenance can ensure the normal operation of all equipment. If not maintained for a long time, the probability of equipment damage is very high, so ordinary farmers must pay attention to this.