The combination rice mill removes the husk of brown rice and grinds it into finished rice that meets the specified quality requirements. At the same time, it is necessary to maximize the purity and yield of rice, and reduce electricity and material consumption. A combination rice mill is a device that utilizes the mechanical force generated by mechanical equipment to peel and whiten brown rice. In order to produce different types of rice, the types of rice mills are also constantly developing. Below is an introduction to the structural principle and usage precautions of the combination rice mill.
Structural principle of combined rice mill:
In the operation of a combined rice mill, two main adjustments are needed: one is to adjust the position of the rice cutter, and the other is to adjust the inlet and outlet gate blades. It consists of a casing, a drum (with a spiral frame on the drum), a rice milling cutter, a processing barrel, and a rice sieve. When working, pour rice into the hopper, open the feeding knife, and the rice flows into the space between the whitening chamber and the drum. Due to the rotation of the drum, the rice is subjected to great pressure and friction, causing the husk to fall off, grinding the husk fine, and turning the rice grains white. Under the continuous rotation of the drum, the rice grains are pushed towards the discharge port through the spiral racks on the drum and flow out from the discharge knife. The rice bran leaked from the rice sieve to the bottom of the cabinet. By mixing the bran portion, the bran is processed into the desired feed for the customer.
Precautions during the use of a combination rice mill:
1. Before using the machine, please check all plugs and connect the wires properly.
2. The voltage of this machine is 220V/50Hz, please confirm before use.
3. The machine is prohibited from working at high temperatures, as the surrounding temperature is below 40 degrees Celsius.
4. Rice or rice that meets safety and hygiene standards can only be processed by machines. Please choose and discard hard objects such as small stones and iron to avoid damaging the machine.
5. During the operation of the machine, if there is a heavy load or blockage, please cut off everything inside the rice milling room before allowing it to work.
6. When working, please clean the bran box promptly when it is two-thirds full to avoid affecting the machine's operation.
7. If the machine is working, do not disassemble it.
8. Do not clean or maintain the machine until it comes to a complete stop.
9. Do not put heavy objects inside to avoid damage.
10. After processing Rice noodles, the machine should continue to rotate for a few minutes. After all Rice noodles are out, the machine can be turned off.
11. Please do not put your hands into the feeding port during machine operation.
12. Do not clean the machine in water or other liquids.